Enhanced accessibility and hydrophobicity of amyloidogenic intermediates of the ß2-microglobulin D76N mutant revealed by high-pressure experiments.

ß2-Microglobulin (ß2m) is the causative protein of dialysis-related amyloidosis. Its unfolding mainly proceeds along the pathway of NC →UC ⇄ UT, whereas refolding follows the UT → IT (→NT) →NC pathway, in which N, I, and U are the native, intermediate, and unfolded states, respectively, with the Pro32 peptidyl-prolyl bond in cis or trans conformation as indicated by the subscript. It is noted that the IT state is a putative amyloidogenic precursor state. Several aggregation-prone variants of ß2m have been reported to date. One of these variants is D76N ß2m, which is a naturally occurring amyloidogenic mutant. To elucidate the molecular mechanisms contributing to the enhanced amyloidogenicity of the mutant, we investigated the equilibrium and kinetic transitions of pressure-induced folding/unfolding equilibria in the wild type and D76N mutant by monitoring intrinsic tryptophan and 1-anilino-8-naphthalene sulfonate fluorescence. An analysis of kinetic data revealed that the different folding/unfolding behaviors of the wild type and D76N mutant were due to differences in the activation energy between the unfolded and the intermediate states as well as stability of the native state, leading to more rapid accumulation of IT state for D76N in the refolding process. In addition, the IT state was found to assume more hydrophobic nature. These changes induced the enhanced amyloidogenicity of the D76N mutant and the distinct pathogenic symptoms of patients. Our results suggest that the stabilization of the native state will be an effective approach for suppressing amyloid fibril formation of this mutant.

Structural Heterogeneity in the Preamyloid Oligomers of ß-2-Microglobulin.

In dialysis patients, the protein ß2-microglobulin (ß2m) forms amyloid fibrils in a condition known as dialysis-related amyloidosis. To understand the early stages of the amyloid assembly process, we have used native electrospray ionization (ESI) together with ion mobility mass spectrometry (IM-MS) to study soluble preamyloid oligomers. ESI-IM-MS reveals the presence of multiple conformers for the dimer, tetramer, and hexamer that precede the Cu(II)-induced amyloid assembly process, results which are distinct from ß2m oligomers formed at low pH. Experimental and computational results indicate that the predominant dimer is a Cu(II)-bound structure with an antiparallel side-by-side configuration. In contrast, tetramers exist in solution in both Cu(II)-bound and Cu(II)-free forms. Selective depletion of Cu(II)-bound species results in two primary conformers-one that is compact and another that is more expanded. Molecular modeling and molecular dynamics simulations identify models for these two tetrameric conformers with unique interactions and interfaces that enthalpically compensate for the loss of Cu(II). Unlike with other amyloid systems in which conformational heterogeneity is often associated with different amyloid morphologies or off-pathway events, conformational heterogeneity in the tetramer seems to be a necessary aspect of Cu(II)-induced amyloid formation by ß2m. Moreover, the Cu(II)-free models represent a new advance in our understanding of Cu(II) release in Cu(II)-induced amyloid formation, laying a foundation for further mechanistic studies as well as development of new inhibition strategies.

Examination of Adsorption Orientation of Amyloidogenic Peptides Over Nano-Gold Colloidal Particle Surfaces.

The adsorption of amyloidogenic peptides, amyloid beta 1-40 (Aß1-40), alpha-synuclein (α-syn), and beta 2 microglobulin (ß2m), was attempted over the surface of nano-gold colloidal particles, ranging from d = 10 to 100 nm in diameter (d). The spectroscopic inspection between pH 2 and pH 12 successfully extracted the critical pH point (pHo) at which the color change of the amyloidogenic peptide-coated nano-gold colloids occurred due to aggregation of the nano-gold colloids. The change in surface property caused by the degree of peptide coverage was hypothesized to reflect the ΔpHo, which is the difference in pHo between bare gold colloids and peptide coated gold colloids. The coverage ratio (Θ) for all amyloidogenic peptides over gold colloid of different sizes was extracted by assuming Θ = 0 at ΔpHo = 0. Remarkably, Θ was found to have a nano-gold colloidal size dependence, however, this nano-size dependence was not simply correlated with d. The geometric analysis and simulation of reproducing Θ was conducted by assuming a prolate shape of all amyloidogenic peptides. The simulation concluded that a spiking-out orientation of a prolate was required in order to reproduce the extracted Θ. The involvement of a secondary layer was suggested; this secondary layer was considered to be due to the networking of the peptides. An extracted average distance of networking between adjacent gold colloids supports the binding of peptides as if they are "entangled" and enclosed in an interfacial distance that was found to be approximately 2 nm. The complex nano-size dependence of Θ was explained by available spacing between adjacent prolates. When the secondary layer was formed, Aß1-40 and α-syn possessed a higher affinity to a partially negative nano-gold colloidal surface. However, ß2m peptides tend to interact with each other. This difference was explained by the difference in partial charge distribution over a monomer. Both Aß1-40 and α-syn are considered to have a partial charge (especially δ+) distribution centering around the prolate axis. The ß2m, however, possesses a distorted charge distribution. For a lower Θ (i.e., Θ <0.5), a prolate was assumed to conduct a gyration motion, maintaining the spiking-out orientation to fill in the unoccupied space with a tilting angle ranging between 5° and 58° depending on the nano-scale and peptide coated to the gold colloid.

The structure of a ß2-microglobulin fibril suggests a molecular basis for its amyloid polymorphism.

All amyloid fibrils contain a cross-ß fold. How this structure differs in fibrils formed from proteins associated with different diseases remains unclear. Here, we combine cryo-EM and MAS-NMR to determine the structure of an amyloid fibril formed in vitro from ß2-microglobulin (ß2m), the culprit protein of dialysis-related amyloidosis. The fibril is composed of two identical protofilaments assembled from subunits that do not share ß2m's native tertiary fold, but are formed from similar ß-strands. The fibrils share motifs with other amyloid fibrils, but also contain unique features including π-stacking interactions perpendicular to the fibril axis and an intramolecular disulfide that stabilises the subunit fold. We also describe a structural model for a second fibril morphology and show that it is built from the same subunit fold. The results provide insights into the mechanisms of fibril formation and the commonalities and differences within the amyloid fold in different protein sequences.

Crystal structure of a TAPBPR-MHC I complex reveals the mechanism of peptide editing in antigen presentation.

Central to CD8+ T cell-mediated immunity is the recognition of peptide-major histocompatibility complex class I (p-MHC I) proteins displayed by antigen-presenting cells. Chaperone-mediated loading of high-affinity peptides onto MHC I is a key step in the MHC I antigen presentation pathway. However, the structure of MHC I with a chaperone that facilitates peptide loading has not been determined. We report the crystal structure of MHC I in complex with the peptide editor TAPBPR (TAP-binding protein-related), a tapasin homolog. TAPBPR remodels the peptide-binding groove of MHC I, resulting in the release of low-affinity peptide. Changes include groove relaxation, modifications of key binding pockets, and domain adjustments. This structure captures a peptide-receptive state of MHC I and provides insights into the mechanism of peptide editing by TAPBPR and, by analogy, tapasin.

Structure of the TAPBPR-MHC I complex defines the mechanism of peptide loading and editing.

Adaptive immunity is shaped by a selection of peptides presented on major histocompatibility complex class I (MHC I) molecules. The chaperones Tapasin (Tsn) and TAP-binding protein-related (TAPBPR) facilitate MHC I peptide loading and high-affinity epitope selection. Despite the pivotal role of Tsn and TAPBPR in controlling the hierarchical immune response, their catalytic mechanism remains unknown. Here, we present the x-ray structure of the TAPBPR-MHC I complex, which delineates the central step of catalysis. TAPBPR functions as peptide selector by remodeling the MHC I α2-1-helix region, stabilizing the empty binding groove, and inserting a loop into the groove that interferes with peptide binding. The complex explains how mutations in MHC I-specific chaperones cause defects in antigen processing and suggests a unifying mechanism of peptide proofreading.

Comparison of the aggregation of homologous ß2-microglobulin variants reveals protein solubility as a key determinant of amyloid formation.

The mouse and human ß2-microglobulin protein orthologs are 70% identical in sequence and share 88% sequence similarity. These proteins are predicted by various algorithms to have similar aggregation and amyloid propensities. However, whilst human ß2m (hß2m) forms amyloid-like fibrils in denaturing conditions (e.g. pH2.5) in the absence of NaCl, mouse ß2m (mß2m) requires the addition of 0.3M NaCl to cause fibrillation. Here, the factors which give rise to this difference in amyloid propensity are investigated. We utilise structural and mutational analyses, fibril growth kinetics and solubility measurements under a range of pH and salt conditions, to determine why these two proteins have different amyloid propensities. The results show that, although other factors influence the fibril growth kinetics, a striking difference in the solubility of the proteins is a key determinant of the different amyloidogenicity of hß2m and mß2m. The relationship between protein solubility and lag time of amyloid formation is not captured by current aggregation or amyloid prediction algorithms, indicating a need to better understand the role of solubility on the lag time of amyloid formation. The results demonstrate the key contribution of protein solubility in determining amyloid propensity and lag time of amyloid formation, highlighting how small differences in protein sequence can have dramatic effects on amyloid formation.

Supersaturation-limited and Unlimited Phase Transitions Compete to Produce the Pathway Complexity in Amyloid Fibrillation.

Although amyloid fibrils and amorphous aggregates are two types of aggregates formed by denatured proteins, their relationship currently remains unclear. We used ß2-microglobulin (ß2m), a protein responsible for dialysis-related amyloidosis, to clarify the mechanism by which proteins form either amyloid fibrils or amorphous aggregates. When ultrasonication was used to accelerate the spontaneous fibrillation of ß2m at pH 2.0, the effects observed depended on ultrasonic power; although stronger ultrasonic power effectively accelerated fibrillation, excessively strong ultrasonic power decreased the amount of fibrils formed, as monitored by thioflavin T fluorescence. An analysis of the products formed indicated that excessively strong ultrasonic power generated fibrillar aggregates that retained ß-structures but without high efficiency as seeds. On the other hand, when the spontaneous fibrillation of ß2m was induced at higher concentrations of NaCl at pH 2.0 with stirring, amorphous aggregates became more dominant than amyloid fibrils. These apparent complexities in fibrillation were explained comprehensively by a competitive mechanism in which supersaturation-limited reactions competed with supersaturation-unlimited reactions. We link the kinetics of protein aggregation and a conformational phase diagram, in which supersaturation played important roles.

A simulated intermediate state for folding and aggregation provides insights into ΔN6 ß2-microglobulin amyloidogenic behavior.

A major component of ex vivo amyloid plaques of patients with dialysis-related amyloidosis (DRA) is a cleaved variant of ß2-microglobulin (ΔN6) lacking the first six N-terminal residues. Here we perform a computational study on ΔN6, which provides clues to understand the amyloidogenicity of the full-length ß2-microglobulin. Contrary to the wild-type form, ΔN6 is able to efficiently nucleate fibrillogenesis in vitro at physiological pH. This behavior is enhanced by a mild acidification of the medium such as that occurring in the synovial fluid of DRA patients. Results reported in this work, based on molecular simulations, indicate that deletion of the N-terminal hexapeptide triggers the formation of an intermediate state for folding and aggregation with an unstructured strand A and a native-like core. Strand A plays a pivotal role in aggregation by acting as a sticky hook in dimer assembly. This study further predicts that the detachment of strand A from the core is maximized at pH 6.2 resulting into higher aggregation efficiency. The structural mapping of the dimerization interface suggests that Tyr10, His13, Phe30 and His84 are hot-spot residues in ΔN6 amyloidogenesis.

Heat of supersaturation-limited amyloid burst directly monitored by isothermal titration calorimetry.

Amyloid fibrils form in supersaturated solutions via a nucleation and growth mechanism. Although the structural features of amyloid fibrils have become increasingly clearer, knowledge on the thermodynamics of fibrillation is limited. Furthermore, protein aggregation is not a target of calorimetry, one of the most powerful approaches used to study proteins. Here, with ß2-microglobulin, a protein responsible for dialysis-related amyloidosis, we show direct heat measurements of the formation of amyloid fibrils using isothermal titration calorimetry (ITC). The spontaneous fibrillation after a lag phase was accompanied by exothermic heat. The thermodynamic parameters of fibrillation obtained under various protein concentrations and temperatures were consistent with the main-chain dominated structural model of fibrils, in which overall packing was less than that of the native structures. We also characterized the thermodynamics of amorphous aggregation, enabling the comparison of protein folding, amyloid fibrillation, and amorphous aggregation. These results indicate that ITC will become a promising approach for clarifying comprehensively the thermodynamics of protein folding and misfolding.

Direct three-dimensional visualization of membrane disruption by amyloid fibrils.

Protein misfolding and aggregation cause serious degenerative conditions such as Alzheimer's, Parkinson, and prion diseases. Damage to membranes is thought to be one of the mechanisms underlying cellular toxicity of a range of amyloid assemblies. Previous studies have indicated that amyloid fibrils can cause membrane leakage and elicit cellular damage, and these effects are enhanced by fragmentation of the fibrils. Here we report direct 3D visualization of membrane damage by specific interactions of a lipid bilayer with amyloid-like fibrils formed in vitro from ß(2)-microglobulin (ß(2)m). Using cryoelectron tomography, we demonstrate that fragmented ß(2)m amyloid fibrils interact strongly with liposomes and cause distortions to the membranes. The normally spherical liposomes form pointed teardrop-like shapes with the fibril ends seen in proximity to the pointed regions on the membranes. Moreover, the tomograms indicated that the fibrils extract lipid from the membranes at these points of distortion by removal or blebbing of the outer membrane leaflet. Tiny (15-25 nm) vesicles, presumably formed from the extracted lipids, were observed to be decorating the fibrils. The findings highlight a potential role of fibrils, and particularly fibril ends, in amyloid pathology, and report a previously undescribed class of lipid-protein interactions in membrane remodelling.

Polymorphism of ß2-microglobulin amyloid fibrils manifested by ultrasonication-enhanced fibril formation in trifluoroethanol.

The polymorphic property of amyloid structures has been focused on as a molecular basis of the presence and propagation of different phenotypes of amyloid diseases, although little is known about the molecular mechanism for expressing diverse structures from only one protein sequence. Here, we have found that, in combination with an enhancing effect of ultrasonication on nucleation, ß(2)-microglobulin, a protein responsible for dialysis-related amyloidosis, generates distinct fibril conformations in a concentration-dependent manner in the presence of 2,2,2-trifluoroethanol (TFE). Although the newly formed fibrils all exhibited a similar needle-like morphology with an extensive cross-ß core, as suggested by Fourier transform infrared absorption spectra, they differed in thioflavin T intensity, extension kinetics, and tryptophan fluorescence spectra even in the same solvents, representing polymorphic structures. The hydrophobic residues seemed to be more exposed in the fibrils originating at higher concentrations of TFE, as indicated by the increased binding of 1-anilinonaphthalene-8-sulfonic acid, suggesting that the modulation of hydrophobic interactions is critical to the production of polymorphic amyloid structures. Interestingly, the fibrils formed at higher TFE concentrations showed significantly higher stability against guanidium hydrochloride, the perturbation of ionic strength, and, furthermore, pressurization. The cross-ß structure inside the fibrils seems to have been more idealized, resulting in increased stability when nucleation occurred in the presence of the alcohol, indicating that a weaker contribution of hydrophobic interactions is intrinsically more amenable to the formation of a non-defective amyloid structure.

Atomic force microscopy of ex vivo amyloid fibrils.

Here, we report a study of ex vivo amyloid fibrils formed, respectively, by the Leu174Ser Apolipoprotein A-I (ApoA-I-LS) variant and by ß2-microglobulin (ß2-m) (Relini et al., J. Biol. Chem. 281:16521-16529, 2006; Relini et al., Biochim. Biophys. Acta 1690:33-41, 2004). In the work on ApoA-I-LS, the AFM has been used to characterize and compare the morphologies of amyloid fibrils isolated from two different patients, while in the study on ß2-m our investigation provided important information about the factors that can promote the aggregation in vivo.

Imaging secondary structure of individual amyloid fibrils of a ß2-microglobulin fragment using near-field infrared spectroscopy.

Amyloid fibril diseases are characterized by the abnormal production of aggregated proteins and are associated with many types of neuro- and physically degenerative diseases. X-ray diffraction techniques, solid-state magic-angle spinning NMR spectroscopy, circular dichroism (CD) spectroscopy, and transmission electron microscopy studies have been utilized to detect and examine the chemical, electronic, material, and structural properties of amyloid fibrils at up to angstrom spatial resolution. However, X-ray diffraction studies require crystals of the fibril to be analyzed, while other techniques can only probe the bulk solution or solid samples. In the work reported here, apertureless near-field scanning infrared microscopy (ANSIM) was used to probe the secondary structure of individual amyloid fibrils made from an in vitro solution. Simultaneous topographic and infrared images of individual amyloid fibrils synthesized from the #21-31 peptide fragment of ß(2)-microglobulin were acquired. Using this technique, IR spectra of the amyloid fibrils were obtained with a spatial resolution of less than 30 nm. It is observed that the experimental scattered field spectrum correlates strongly with that calculated using the far-field absorption spectrum. The near-field images of the amyloid fibrils exhibit much lower scattering of the IR radiation at approximately 1630 cm(-1). In addition, the near-field images also indicate that composition and/or structural variations among individual amyloid fibrils were present.

Folding and fibrillogenesis: clues from beta2-microglobulin.

Renal failure impairs the clearance of beta(2)-microglobulin from the serum, with the result that this protein accumulates in joints under the form of amyloid fibrils. While the molecular mechanism leading to deposition of amyloid in vivo is not totally understood, some organic compounds, such as trifluoroethanol (TFE), are commonly used to promote the elongation of amyloid fibrils in vitro. This article gives some insights into the structural properties and the conformational states of beta(2)-microglobulin in the presence of TFE, using both the wild-type protein and the mutant Trp60Gly. The structure of the native state of the protein is rather insensitive to the presence of the alcohol, but the stability of this state is lowered in comparison to some other conformational states. In particular, a native-like folding intermediate is observed in the presence of moderate concentrations of TFE. Instead, at higher concentrations of the alcohol, the population of a disordered native-unlike state is dominant and correlates with the ability to elongate fibrils.

Ultrasonication-dependent production and breakdown lead to minimum-sized amyloid fibrils.

Because of the insolubility and polymeric properties of amyloid fibrils, techniques used conventionally to analyze protein structure and dynamics have often been hampered. Ultrasonication can induce the monomeric solution of amyloidogenic proteins to form amyloid fibrils. However, ultrasonication can break down preformed fibrils into shorter fibrils. Here, combining these 2 opposing effects on beta(2)-microglobulin (beta2-m), a protein responsible for dialysis-related amyloidosis, we present that ultrasonication pulses are useful for preparing monodispersed amyloid fibrils of minimal size with an average molecular weight of approximately 1,660,000 (140-mer). The production of minimal and monodispersed fibrils is achieved by the free energy minimum under competition between fibril production and breakdown. The small homogeneous fibrils will be of use for characterizing the structure and dynamics of amyloid fibrils, advancing molecular understanding of amyloidosis.

Mechanism of lysophosphatidic acid-induced amyloid fibril formation of beta(2)-microglobulin in vitro under physiological conditions.

Beta(2)-microglobulin- (beta2m-) based fibril deposition is the key symptom in dialysis-related amyloidosis. beta2m readily forms amyloid fibrils in vitro at pH 2.5. However, it is not well understood which factors promote this process in vivo, because beta2m cannot polymerize at neutral pH without additives even at elevated concentration. Here we show that lysophosphatidic acid (LPA), an in vivo occurring lysophospholipid mediator, promotes amyloid formation under physiological conditions through a complex mechanism. In the presence of LPA, at and above its critical micelle concentration, native beta2m became sensitive to limited proteolytic digestion, indicating increased conformational flexibility. Isothermal titration calorimetry indicates that beta2m exhibits high affinity for LPA. Fluorescence and CD spectroscopy, as well as calorimetry, showed that LPA destabilizes the structure of monomeric beta2m inducing a partially unfolded form. This intermediate is capable of fibril extension in a nucleation-dependent manner. Our findings also indicate that the molecular organization of fibrils formed under physiological conditions differs from that of fibrils formed at pH 2.5. Fibrils grown in the presence of LPA depolymerize very slowly in the absence of LPA; moreover, LPA stabilizes the fibrils even below its critical micelle concentration. Neither the amyloidogenic nor the fibril-stabilizing effects of LPA were mimicked by its structural and functional lysophospholipid analogues, showing its selectivity. On the basis of our findings and the observed increase in blood LPA levels in dialysis patients, we suggest that the interaction of LPA with beta2m might contribute to the pathomechanism of dialysis-related amyloidosis.

Globular tetramers of beta(2)-microglobulin assemble into elaborate amyloid fibrils.

Amyloid fibrils are ordered polymers in which constituent polypeptides adopt a non-native fold. Despite their importance in degenerative human diseases, the overall structure of amyloid fibrils remains unknown. High-resolution studies of model peptide assemblies have identified residues forming cross-beta-strands and have revealed some details of local beta-strand packing. However, little is known about the assembly contacts that define the fibril architecture. Here we present a set of three-dimensional structures of amyloid fibrils formed from full-length beta(2)-microglobulin, a 99-residue protein involved in clinical amyloidosis. Our cryo-electron microscopy maps reveal a hierarchical fibril structure built from tetrameric units of globular density, with at least three different subunit interfaces in this homopolymeric assembly. These findings suggest a more complex superstructure for amyloid than hitherto suspected and prompt a re-evaluation of the defining features of the amyloid fold.

Destruction of amyloid fibrils of a beta2-microglobulin fragment by laser beam irradiation.

To understand the mechanism by which amyloid fibrils form, we have been making real-time observations of the growth of individual fibrils, using total internal fluorescence microscopy combined with an amyloid-specific fluorescence dye, thioflavin T (ThT). At neutral pH, irradiation at 442 nm with a laser beam to excite ThT inhibited the fibril growth of beta(2)-microglobulin (beta2-m), a major component of amyloid fibrils deposited in patients with dialysis-related amyloidosis. Examination with a 22-residue K3 fragment of beta2-m showed that the inhibition of fibril growth and moreover the destruction of preformed fibrils were coupled with the excitation of ThT. Several pieces of evidence suggest that the excited ThT transfers energy to ground state molecular oxygen, producing active oxygen, which causes various types of chemical modifications. The results imply a novel strategy for preventing the deposition of amyloid fibrils and for destroying preformed amyloid deposits.

A comprehensive model for packing and hydration for amyloid fibrils of beta2-microglobulin.

Volume can provide informative structural descriptions of macromolecules such as proteins in solution because a final volumetric outcome accompanies the exquisite equipoise of packing effects between residues, and residues and waters inside and outside proteins. Here we performed systematic investigations on the volumetric nature of the amyloidogenic conformations of beta2-microglobulin (beta2-m) and its amyloidogenic core peptide, K3, using a high precision densitometer. The transition from the acid-denatured beta2-m to the mature amyloid fibrils was accompanied by a positive change in the partial specific volume, which was larger than that observed for the transition from the acid-denatured beta2-m to the native structure. The data imply that the mature amyloid fibrils are more voluminous than the native structure because of a sparse packing density of side chains. In contrast, the formation of the mature amyloid-like fibrils of the K3 from the random coil was followed by a considerable decrease in the partial specific volume, suggesting a highly compact core structure. Interestingly, the immature amyloid-like fibrils of beta2-m exhibited a volume intermediate between those of the mature fibrils of beta2-m and K3, because of the core structure at their center and the relatively noncompact region around the core with much hydration. These volumetric differences would result from the nature of main-chain-dominated fibrillogenesis. We suggest comprehensive models for these three types of fibrils illustrating packing and hydrational states.